Financial Options Available
  • Affirm
  • Paypal Credit
Learn More
Requesting a Quote?
Looking for better pricing for an item? Create a new company account now togain access to quoting, quick ordering, and more. Learn more details here.
See an issue on this page? Let us know.

Zacuto Sony FX6 Z-Finder Recoil Pro

0 reviews
Questions about this product?
  • Balances Camera over Shoulder
  • Zacuto VCT Pro Baseplate
  • Zacuto Z-Finder
  • Axis Micro and Fluid Rosette Joint
  • Zacuto Rosette Trigger Grip
  • Zacuto FX6 Top Plate
  • Zacuto FX6 Handle Mount
  • LANC Cable

The Zacuto Sony FX6 Z-Finder Recoil Pro enables you to establish a balanced point directly over your shoulder, allowing film- or ENG-style shooting with your camera. Each component harmonizes to offer robust support, precise control, customizable balance, and convenient accessory mounting without straining your camera's body. The Recoil Pro setup empowers swift rebalancing for various lenses or accessories, effectively mitigating fatigue while facilitating the creation of seamless handheld shots.

The included Zacuto Sony FX6 Z-Finder Recoil Pro slides onto the Sony LCD and provides 2.5x magnification of the LCD for a larger, clearer image with diopter adjustment. The included Axis Micro and Fluid Rosette Joint allow you to adjust the angle of the Z-Finder. The VCT Pro is a padded shoulder support that mounts onto a VCT plate for quick tripod mounting and unmounting. It features a forward/back adjustable camera mounting plate, 15mm LWS rod clamps, rods, and an ARRI rosette. The included rosette trigger grip attaches to the rosette on the VCT Pro, and it allows you to move the Sony handgrip that came with your camera forward and off the camera, for better balance, while maintaining the electronic control over your camera with the included 13.5" long LANC cable. The top plate and handle mount allow you to mount additional accessories on your camera via 1/4"-20, 3/8"-16, and ARRI-style accessory mounting holes, or optional 15mm rods.

Zacuto VCT Pro Baseplate

With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa. A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear. The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers. An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.

Key Features

  • Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
  • 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
  • VCT14-compatible V-wedge
  • 1/4"-20 and 3/8"-16 tripod mount holes
  • Ergonomic gel polymer shoulder pad
  • 15mm LWS rod adapter on the rear
  • Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
  • ARRI M6 rosette
  • Three 1/4"-20 threaded holes for accessories
  • Includes two 6.5" 15mm rods
  • 1/4"-20 and 3/8"-16 screws supplied
  • Made in the USA

Zacuto Trigger Grip for Sony FS5 & FX6

The Trigger Grip for Sony FS5 & FX6 from Zacuto is an adjustable relocator for the camera grip of the Sony FS5 or FX6 camera. It's designed to attach to camera supports offering an ARRI-standard rosette, including the Zacuto VCT Pro baseplate. The entire unit can be rotated a full 360° at the quick press of a lever with no need to unscrew a knob or lever as with standard handgrips, and it can also be adjusted in length by loosening another lever.

Zacuto Sony FX6 Z-Finder

The Z-Finder for Sony FX6 from Zacuto is an optical viewfinder that uses 2.5x magnification to turn the camera's LCD monitor into a clear, easy-to-focus viewfinder. Designed specifically for use with the Sony FX6 LCD screen, the Z-Finder features a flip-up design and a diopter wheel for focusing and has a mounting bracket that attaches to the Sony 15mm rod mount. It includes two extender frames for farsighted use and can be used with separately available drop-in diopters for further correction. This finder's large, lightproof eyecup also increases the stability of handheld footage by adding a point of contact between the camera and the user's eye.

A built-in aluminum sun mask on the Z-Finder protects the LCD screen from sunlight. The viewfinder has an Anti-Fog disc installed to keep the view clear in humid or cold conditions and also includes an additional disc.


WARNING: The Z-Finder is a magnifier and as such will magnify the sun, which can damage the LCD screen if the sun is allowed to shine directly through the Z-Finder lens. Use the enclosed lens cap to block light from entering your Z-Finder when not in use.

  • Dedicated optical viewfinder for Sony FX6
  • Flips up 140° to view LCD from distance
  • Focusing diopter and two frame extenders
  • -4 to 0 diopter range with included extenders
  • Use with separately available frames for greater correction
  • Built-in aluminum sun mask
  • Two anti-fog disks
  • Lens cap and dust cover included

Zacuto Sony FX6 Top Plate

Designed for attaching accessories, the cheese plate-style Sony FX6 Top Plate from Zacuto can be used with or without the original Sony handle mounted on your camera. It provides a NATO/Z-Rail, two 15mm rod supports, and multiple 1/4"-20 and 3/8"-16 ARRI-style accessory threads. Use the rail to attach accessories like a monitor arm and use the 15mm brackets to support rod-mounted lens motors.

Versatile Accessory Mounting

  • Multiple 1/4"-20 threads
  • Multiple 3/8"-16 anti-twist threads
  • NATO/Z-Rail

Top Cheese Plate

Works with or without the original Sony top handle

Zacuto Sony FX6 Handle Mount

The Zacuto Sony FX6 Handle Mount screws into the handle unit of the camera and provides a 15mm rod port for attaching a 15mm EVF mount, such as the Zacuto Axis Micro or Mini. It screws into the handle tool-free and sturdy, and it positions at a 45° angle. The rod port is secured via a lever, also tool-free.

In the Box
  • Zacuto VCT Pro Baseplate
    • 2 x 6.5" 15mm Rods
    • 1/4"-20 Camera Screw
    • 3/8"-16 Camera Screw
    • Limited Lifetime Manufacturer Warranty
  • Zacuto Trigger Grip for Sony FS5 & FX6
    • Limited Lifetime Manufacturer Warranty
  • Zacuto Sony FX6 Z-Finder
    • Zacuto Z-Finder Dust Cover
    • 2 x Extender Frame
    • 2 x Anti-Fog Disk (1 x Installed)
    • Flip-Up Mounting Frame
    • Mounting Bracket
    • Lens Cap
    • Sun Mask
    • Protective Boot
    • Limited Lifetime Warranty
  • Zacuto Sony FX6 Top Plate
    • 2 x 15mm Rod Bracket
    • Mounting Screw Set
    • Limited 1-Year Manufacturer Warranty
  • Zacuto Sony FX6 Handle Mount
    • Limited Lifetime Warranty
  • LANC Cable (13.5")
  • Axis Micro
  • Fluid Rosette Joint
Zacuto Logo
View Page
More Information
Product ConditonNew
Support Type

Shoulder Support

Grip Type


Camera Compatibility



Rod Standard

15 mm LWS / 60 mm Spacing

Included Rods

2 x 6.5" / 16.5 cm 15 mm Rod

Accessory Mounting

Side: 3 x 1/4"-20 Female Thread

Camera Mounting

Quick Release Plate with 1/4"-20 Male Screw, 3/8"-16 Male Screw

Tripod Mounting

1/4"-20 Female Thread, 3/8"-16 Female Thread, VCT-14

Rod Ports

2 x 15 mm Rod Port


Side: 1 x ARRI Rosette w/ M6 Female Thread



14.25 x 4.25 x 2" / 36.2 x 10.8 x 5 cm (with Rods)


2.1 lb / 0.96 kg

Packaging Info

Package Weight

2.85 lb

Box Dimensions (LxWxH)

11.7 x 10.4 x 7.8"

Zacuto Trigger Grip For Sony FS5 & FX6 Specs

Packaging Info

Package Weight

0.905 lb

Box Dimensions (LxWxH)

10.75 x 5.5 x 2.3"

Zacuto Sony FX6 Z-Finder Specs



Diopter Range

-4 to 0 Using Included Extender Frames

Dimensions and Weight

Not Specified by Manufacturer

Packaging Info

Package Weight

1.69 lb

Box Dimensions (LxWxH)

10.8 x 7.2 x 3.8"

Zacuto Sony FX6 Top Plate Specs

Accessory Mounting Threads

Multiple 1/4"-20 Multiple Anti-Twist 3/8"-16

Rail Type

1 x NATO/Zacuto Z-Rail


Not Specified by Manufacturer


Not Specified by Manufacturer

Packaging Info

Package Weight

0.415 lb

Box Dimensions (LxWxH)

6.4 x 4.15 x 2.1"

Zacuto Sony FX6 Handle Mount Specs

Packaging Info

Package Weight

0.115 lb

Box Dimensions (LxWxH)

4.4 x 2.9 x 1"

WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Copyright © 2023 Polyline Corp, a Magnasync/Moviola Company.