Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Teradek RT MDR-SK Wireless Lens Control Kit with 6-Axis Transmitter for RED

$6,199.95
SKU
69311
MPN
15-0021
  • 6-Axis MK3.1 Transmitter/Controller
  • 3-Channel DSMC2 Sidekick Receiver
  • Includes MK3.1 Motor with Drive Cable
  • Customizable Camera Controls
  • Approx. 3000' Range
  • Expandable with Motors and Thumbwheels
  • Includes Hard Case

The Teradek RT MDR-SK Wireless Lens Control Kit with 6-Axis Transmitter for RED is an all-inclusive, single-motor setup that allows for the controlling of cinema lenses mounted to RED DSMC2 cameras. The kit integrates a 6-axis MK3.1 transmitter and 3-channel Latitude sidekick receiver. The components can be stored in a hard case during transport and storage.

Teradek's RT MK3.1 6-Axis Wireless Controller provides up to 6-axis lens motor control (receiver and motors available separately). Stepping-up from the 4-axis version, the MK3.1 6-Axis Controller includes a Force Joystick zoom button for smooth, sensitive zoom moves. It also offers a large focus knob, one slider control, and two side knobs (A and B). Each input on the versatile MK3.1 Controller can be mapped to any lens axis (focus, iris, zoom direction/speed, or 3D function) as you prefer. In addition to F/I/Z control, the MK3.1 system enables you to remotely start/stop select HD cameras such as ARRI, Blackmagic, Phantom Flex, RED, Sony, and LANC-compatible models.

The slim RT Latitude MDR-SK SIDEKICK Interface is a component of the Latitude lens control system. Sandwiched between the SIDEKICK and your DSMC2 camera, this unit provides an array of input and output ports for various control devices. Use the MDR-SK with the RT MK3.1 wireless controller to drive up to three RT MK3.1 lens motors. Or attach up to two Slave Controllers like the RT Thumbwheel, Zoomrocker, or Smartknob to the MDR-SK's two accessory inputs.

Teradek's RT MK3.1 Brushless Lens Motor is designed to remotely control your lens focus, iris, or zoom, or other function. The MK3.1 motor operates smoothly and quietly, even during slow, high-torque moves. This brushless motor features electronic backlash-compensation, a high-resolution encoder, and an integrated heat sink. For optimal flexibility, a gear can be attached to either side of the MK3.1 Motor, expanding position choice to either side of the lens, depending on your camera configuration.

Use the 8" RT Latitude MDR Motor Cable to connect the MDR lens motor to a Latitude MDR or MK3.1 receiver. Design features include thin, ultra-flexible cable, and two right-angle connectors. This cable is designed to exit the motor in a vertical position, creating a neat, compact route to the Latitude MDR receiver (however, the angle points downwards from the MK3.1 receiver).

Use the 10" RT Latitude MDR Camera Control Cable to connect the MDR receiver to a RED DSMC2/DSMC camera with a control port. Design features include two straight LEMO connectors, and a shorter length than the 16" version of this cable. This cable will trigger the run/stop function on the camera, control EF-mount lenses, and more.

Teradek's Cheeseplate for RT MDR-SK plate attaches to the RT Latitude MDR-SK DSMC2 module, or to the RED DSMC2 brain's Sidekick slot. This plate features multiple 1/4"-20 threaded holes for attaching various accessories.

The 16" RT MDR Power Cable connects power to the Latitude MDR receiver from a battery with a D-tap output port. This cable is designed with a right-angled, 4-pin, Hirose connector on one end, and a straight, D-Tap connector on the other.

Use the 6.6' RT Wired-Mode Controller Cable to connect an RT controller to an RT receiver in settings like hospitals where wireless use is not practical, or not permitted. This cable is compatible with the MK3.1 Controller, MK3.1 Receiver, all Latitude MDR models, Smartknob, other RT controllers, and supported OMOD controls.

Use the RT MK3.1 System Case to transport a complete MK3.1 lens control system. The interior of this hard case has a foam interior custom-cut to fit up to three lens motors, one receiver, eight marking disks, and accessories such as a thumbwheel. The MK3.1 System Case is a dust-proof, waterproof case with an integrated pressure valve. Your receiver and motors may be stored attached to their mounting brackets, saving you time when reassembling the system.

The RT Controller Neck Strap from Teradek is designed to carry the MK3.1 controller hand unit. Use this strap to position the control unit around your neck or across your body, or to drape the controller from a stand when not in use.

The Paralinx 7.4V/2000mAh Li-Ion Battery from Teradek is a Canon LP-E6-style battery designed for powering the Paralinx Triton transmitter unit. It features a capacity of 2000mAh and 7.4V of output and can power the receiver for approximately 2 to 3 hours. It attaches directly to the compatible battery plate on the transmitter unit.

The Paralinx Battery Charger from Teradek is designed for charging the LP-E6 compatible 7.4V/2000mAh battery pack for the Paralinx Triton transmitter unit.

The White Marking Disk for RT MK3.1 Controller from Teradek works with the RT MK3.1 hand unit. Use this beveled disk for marking focus distances or iris stops. Marks from non-permanent and china markers are easily removed; use isopropyl alcohol to clean notations made with permanent markers.

More Information
SKU 69311
Specifications "

MK3.1 6-Axis Wireless Lens Controller with Joystick Zoom

Power Requirements Canon LP-E6 Battery: 6.2 to 8.4 V
USB Port: 4.75 to 9 V (maximum)
Transmission Rate: 16-bit
Range: 0.9 miles (1.5 km)
Latency 2 ms
Certifications FCC/IC/CE
Mounting Options 3 x 1/4"-20 holes
1 x lanyard mount
Material of Construction Aerospace-grade aluminum billet
Dimensions Excluding Knob: 5.5 x 2.8 x 1.2" (140 x 70 x 31 mm)
Including Knob & Antenna: 6.1 x 4.3 x 3" (155 x 110 x 75 mm)
Weight 1.3 lb (576 g)

RT Latitude MDR-SK SIDEKICK Interface for Red DSMC2 Cameras (3 Axis)

Interface - Connectors 1 x Power input
3 x Power outputs
3 x Motor ports
2 x Slave controller inputs 

RT MK3.1 Brushless Lens Motor

Maximum Torque 2.2 nm
Dimensions 4.5 x 1.6 x 1" (115 x 40 x 26 mm)
Weight 7.5 oz (212 g)

RT Latitude MDR Motor Cable (8", RA to RA)

Cable Length 7.9" (20 cm)

RT Latitude MDR RED Camera Control Cable (10")

Cable Length 9.8" (25 cm)

Cheeseplate for RT MDR-SK Sidekick & RED DSMC2

Accessory Mounting Threads 1/4"-20

RT Latitude MDR Receiver D-Tap Power Cable (16", RA to Straight)

Length 15.7" (40 cm)
Cable Connectors 4-pin Hirose, D-Tap

RT Wired-Mode Controller Cable (6.6')

Cable Length 6.6' (200 cm)

RT Case for MK3.1 System with Up to 3x Motors

Dimensions 8.3 x 7.5 x 10.6" (21 x 19 x 27 cm)
Weight 4.4 lb (2 kg)
"
Customer Reviews Copyright © 2017 Polyline Corp, a Magnasync/Moviola Company.