$16,390.00
Financial Options Available
  • Affirm
  • Paypal Credit
Learn More
Requesting a Quote?
Looking for better pricing for an item? Create a new company account now togain access to quoting, quick ordering, and more. Learn more details here.
See an issue on this page? Let us know.
SKU
118383
MPN
10-2120-V

Teradek Bolt 4K MAX Wireless TX/RX Deluxe Kit (V-Mount)

0 reviews
Questions about this product?
  • Bolt 4K MAX Transmitter & Receiver Set
  • Array 4K Panel Antenna
  • Transmit up to 5000' Line of Sight
  • 12G-SDI and HDMI Inputs,12G-SDI Loop-Out
  • V-Mount Battery Plates
  • Send Video to up to Six Receivers
  • SKB Case, Mount, Tool Set Included

The Teradek Bolt 4K MAX Wireless TX/RX Deluxe Kit (Gold Mount) is a 4K wireless transmitter and receiver with an included panel antenna array capable of transmitting to/receiving a signal of up to 5,000' away. Untethered, this set will transmit uncompressed 4K60 video with less than 1 ms of delay (receiver with fully charged internal battery). The Teradek Bolt 4K MAX Wireless TX/RX Deluxe Kit (Gold Mount) the transmitter, receiver, and panel are identical.

The included transmitter can send video signals to six separate receivers, and is compatible with all the Bolt 4K models. It features 12G-SDI, HDMI 2.0, and a 12G-SDI loop-output. The receiver unit features two 12G-SDI and an HDMI 2.0 connector. It also supports HDR workflows, 10-bit 4:22 via 12G-SDI, and 8-bit 4:4:4 via HDMI. The set also includes power, HDMI, USB, and SDI cables, mounting gear, a tool set, and a hard-shell SKB carry case.

Teradek Bolt 4K MAX 12G-SDI/HDMI Wireless Transmitter (V-Mount)

Use the Bolt 4K MAX 12G-SDI/HDMI Wireless Transmitter from Teradek with Gold mount battery plate to transmit 4K60 video signals from a 12G-SDI or HDMI input to any Bolt 4K series receiver with less than 1 ms of latency. The transmitter unit can be secured to a camera or other SDI/HDMI video source via a built-in 1/4"-20 threaded hole as well as two M3 threaded holes. The four included antennas provide a powerful signal for up to a 3000' line of sight, and with the 4K Array Panel antenna you can transmit up to 5000' line of sight.

The transmitter supports cross conversion from HDMI input to SDI loop output. It also supports HDR workflows, 10-bit 4:2:2 via 12G-SDI, and 8-bit 4:4:4 via HDMI. Its bright LED screen shows current settings and frequencies, and the transmitter can also connect with the Bolt app for iOS via Bluetooth for configuration.

Power can be provided using a Gold mount battery or with the integrated 2-pin connector and included AC adapter. The transmitter supports up to six receivers, and it can operate up to six transmitters in the same area along with Wi-Fi or 5 GHz appliances with the help of the noise rejection feature. It also features a built-in AES-256 encryption with RSA-1024 key exchange.

Also included are four antennas, a D-Tap power cable, a USB cable, an SDI cable, an HDMI cable, and cable cover plates.

  • HDMI and 12G-SDI inputs, with 12G-SDI loop-through output
  • 3000' line-of-sight range, 5000' line-of-sight range with separately available 4K Array panel antenna
  • Compatible with any Bolt 4K series receiver
  • Up to 48 kHz 24-bit PCM embedded audio supported
  • SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
  • 1/4"-20 and M3 mounting points
  • 2-pin LEMO-type power input
  • Built-in display with joystick navigation
  • Micro-USB port for upgrades

Teradek Bolt 4K MAX 12G-SDI/HDMI Wireless Receiver (V-Mount)

Use the Bolt 4K MAX 12G-SDI/HDMI Wireless Receiver from Teradek with a V-mount plate to receive visually lossless 4K60 video signals from any Bolt 4K series transmitter with less than 1 ms of latency and send them out two 12G-SDI outputs or one HDMI output. The receiver unit can be secured to a camera or other SDI/HDMI video source via built-in 1/4"-20 or 3/8"-16 threaded holes. The five included antennas provide a powerful signal that can receive from up to a 3000' line of sight.

The receiver supports cross conversion from HDMI input to SDI loop output. It also supports HDR workflows, 10-bit 4:22 via 12G-SDI, and 8-bit 4:4:4 via HDMI. Its bright LED screen shows current settings and frequencies, and the transmitter can also connect with the Bolt app for iOS via Bluetooth for configuration.

Power can be provided using the integrated 2-pin connector with the included AC adapter or with a V-mount battery. A Bolt 4K transmitter supports up to six receivers, and it can operate up to six transmitters with receivers in the same area with Wi-Fi or 5 GHz appliances with the help of the noise rejection feature. It also features built-in AES-256 encryption with RSA-1024 key exchange to protect your video from prying eyes.

  • Two 12G-SDI outputs and one HDMI output
  • 3000' line-of-sight range
  • Compatible with any Bolt 4K series transmitter
  • Up to 48 kHz 24-bit PCM embedded audio supported
  • SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
  • 1/4"-20 and 3/8"-16 mounting points
  • 2-pin LEMO-type power input
  • Built-in display with joystick navigation
  • Micro-USB port for upgrades
  • Wooden Camera Ultra Arm Mini Monitor Mount (1/4"-20 to 3/8"-16)

The 1/4"-20 to 3/8"-16 Ultra Arm Mini Monitor Mount from Wooden Camera is a robust and compact articulating arm with 25mm ball joints. Approximately 5" in length from end to end, the Ultra Arm Mini is designed for keeping a monitor or other accessory close to the camera while providing the full range of ball joint articulation. A lever in the center locks both ball joints, and the mounting points on the ends attach to your gear easily at the turn of integrated tightening knobs. Two locating pins are included that can be user-installed on the 3/8"-16 end to convert it to an ARRI Accessory Mount compatible end. Both ends feature rubber pads for more secure support.

The Ultra Arm system is interchangeable. Wooden Camera offers a variety of optional end points that install into the ball sockets of the arm. These include NATO clamps, NATO rails, shoe mounts, super clamps, and extensions to add between two of these arms. There is even a Preston mounting bracket. Additionally, the system is compatible with many third-party 25mm ball mount systems.

Key Features

  • Full-range ball joint articulation
  • Integrated tightening knobs
  • Rubber pads
  • Interchangeable end points support optional NATO clamps, NATO rails, shoe mounts, super clamps, length extensions, and more (see Accessories tab)
  • Also compatible with third-party 25mm ball mount systems
In the Box
  • Teradek Bolt 4K MAX 12G-SDI/HDMI Wireless Transmitter (V-Mount)
    • HDMI Type A Cable
    • 2 x Wire Cover Plate
    • 2-Pin to D-Tap Cable (18")
    • USB Type-A to Type-B Cable (3')
    • 12G-SDI BNC Cable (18")
    • 30W Power Supply with 6' Cable
    • 4 x Antenna
    • 4 x Screw
    • Limited 1-Year Manufacturer Warranty
  • Teradek Bolt 4K MAX 12G-SDI/HDMI Wireless Receiver (V-Mount)
    • 2 x Bolt 4K Wire Cover Plate (Machined Anodized)
    • HDMI Type A Cable (18")
    • 2-Pin to D-Tap Power Cable (18")
    • USB Type-A to Type-B Cable (3')
    • 12G-SDI BNC Cable (18")
    • 30W Power Supply with 6' Cable
    • 5 x Antenna
    • 2 x Flathead Screw
    • Box with Foam
    • Limited 1-Year Manufacturer Warranty
  • Wooden Camera Ultra Arm Mini Monitor Mount (1/4"-20 to 3/8"-16)
    • Set of Locating Pins for ARRI Accessory Mount Compatibility
    • Limited 1-Year Manufacturer Warranty
  • Panel Antenna Array (V-Mount)
  • 4 x Wire Cover Plate
  • Transmitter Mounting Bracket
  • Light Stand Adapter 3/8"-16
  • Shoe Adapter
  • 4 x Phillips Screw
  • 2 x Socket Cap Screw
  • Allen Wrench
  • SKB XL Carry Case
Teradek Logo
Teradek
View Page
More Information
SKU118383
BrandsTeradek
MPN10-2120-V
Product ConditonNew
Specifications
Antenna I/O

4x RP-SMA Female

Embedded Audio

HDMI: 2-Channel SDI: 2-Channel

Encryption

256-Bit AES

Wireless

Wireless Range

3000' / 914.4 m (Line-of-Sight)

# of Channels

14 (40 MHz)

Channel Bandwidth

40 MHz

Frequency Range

US: 5.19 to 5.23 GHz US: 5.75 to 5.79 GHz US: 5.27 to 5.67 GHz

Latency

< 1 ms

RF Power

19 dBm

Format Support

Audio Format

2-Channel 24-Bit 48 kHz PCM Audio

Wireless Video Compression

Uncompressed

Timecode Support

Yes

Power

Built-In Battery

No

Environmental

Operating Temperature

32 to 72°F / 0 to 40°C

Teradek Bolt 4K MAX 12G-SDI/HDMI Wireless Receiver (V-Mount) Specs

Wireless

Wireless Range

3000' / 914.4 m (Line-of-Sight)

# of Channels

14 (40 MHz)

Frequency Range

US: 5.19 to 5.23 GHz US: 5.75 to 5.79 GHz US: 5.27 to 5.67 GHz

Latency

< 1 ms

RF Power

17 dBm

Format Support

Audio Format

2-Channel 24-Bit 48 kHz PCM Audio

Wireless Video Compression

Uncompressed

Timecode Support

Yes

Power

Built-In Battery

No

Environmental

Antenna I/O

5x RP-SMA Female

Embedded Audio

HDMI: 2-Channel SDI: 2-Channel

Encryption

256-Bit AES

Operating Temperature

32 to 72°F / 0 to 40°C

Wooden Camera Ultra Arm Mini Monitor Mount (1/4"-20 To 3/8"-16) Specs

Top Mount

3/8"-16 Male

Bottom Mount

1/4"-20 Male

Points of Articulation

2

Maximum Length

5" / 12.7 cm

Weight

4.8 oz / 136 g

Packaging Info

Package Weight

0.41 lb

Box Dimensions (LxWxH)

5.65 x 2.75 x 1.2"

WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Copyright © 2023 Polyline Corp, a Magnasync/Moviola Company.