Loading...
$550.00
Financial Options Available
  • Affirm
  • Paypal Credit
Learn More
Requesting a Quote?
Looking for better pricing for an item? Create a new company account now togain access to quoting, quick ordering, and more. Learn more details here.
See an issue on this page? Let us know.
SKU
113011
MPN
MP-1

Sound Devices Battery-Powered Single-Channel Microphone Preamplifier

0 reviews
Questions about this product?
  • Compact and Portable
  • Transformer Balanced
  • Extended-Range Peak Limiter
  • Runs on Two AA Batteries
  • 48 / 12V Phantom Power
  • 80 / 160 Hz High-Pass Filter
  • Aluminum Chassis with Metal End Rails
  • 20 Hz to 50 kHz Audio Bandwidth
  • Easy-Access Battery Compartment

The Sound Devices Battery-Powered Single-Channel Microphone Preamplifier creates studio-grade audio in a portable, lightweight package designed for high-definition field production applications. It has a transformer-balanced XLR microphone input and line-level output, providing high gain and a low noise floor, as well as a large gain-adjustment dial allowing up to 66dB of gain in eleven discrete steps. A 3-position phantom power switch enables 12 or 48V phantom power for condenser microphones. A low-cut filter switch eliminates noise due to wind and proximity effect at 80 or 160 Hz (user switchable). Peak limiter switch moderates signal peaks, eliminating distortion due to signal over load. The MP-1 is powered with 2 AA batteries (available separately) for approximately 24 hours.

 

FEATURES:

  • Compact and Portable
  • Transformer Balanced
  • Extended-Range Peak Limiter
  • Runs on Two AA Batteries
  • 48 / 12V Phantom Power
  • 80 / 160 Hz High-Pass Filter
  • Aluminum Chassis with Metal End Rails
  • 20 Hz to 50 kHz Audio Bandwidth
  • Easy-Access Battery Compartment
In the Box
  • Sound Devices MP-1 Single-Channel Portable Microphone Preamplifier
Sound Devices Logo
Sound Devices
View Page
More Information
SKU113011
BrandsSound Devices
MPNMP-1
Product ConditonNew
Specifications

Sound Devices MP-1 Specs

Inputs 1 - XLR 3-Pin Female, Transformer Balanced
Output 1 - XLR 3-Pin Male, Transformer Balanced
Link Input/Output No
Impedance Input: 2000 Ohms
Output: 130 Ohms
Gain 0 to 66 dB Input to Output, Switch Selectable
Hum & Noise EIN: -126 dBu (-128 dBV) Max
150 Ohms Source, Flat Weighting, 22 Hz to 22 kHz Bandwidth, Gain Setting 36 dB or Greater)
Frequency Response 20 Hz to 22 kHz, +0.1 / -0.5 / -1 dB at 50 kHz
(Relative to 1 kHz Level with 150 Ohms Source)
Distortion 0.05% Max
(from 60 Hz to 22 kHz at +4 dBu Output level, 22 Hz to 22 kHz Filter Bandwidth, +46 dB Gain Setting)
Metering Power LED
Green: Indicates Power and Full Battery
Red: Indicates Power and Low Battery (Red Status Indicates 4 Hours of Battery Life Remain)
Control Voltage Out No
Phantom Power 48 & 12 V
Power 2 x AA Alkaline Batteries
24-Hour Life Typical with +4 dBu Signal into 600 Ohms, no Phantom Power
Operating Temperature 32 to 160°F / 0 to 70°C
Dimensions 1.7 x 3.7 x 5.5" / 43 x 94 x 140 mm
Weight 1.24 lb / 560 g
Packaging Info
Package Weight 2.05 lb
Box Dimensions (LxWxH) 10.7 x 7.3 x 5"
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Copyright © 2023 Polyline Corp, a Magnasync/Moviola Company.