SmallRig MagicFIZ Wireless Follow Focus Two-Motor Kit

The SmallRig MagicFIZ Wireless Follow Focus Two-Motor Kit 

Other features include wireless control from up to 328' away, an anti-interference algorithm, A-B stops, QC/PD fast charging, 0.8 MOD cine gears, 20-hour operation, and low-power OLED displays. A carry bag is included to store and transport the entire kit.

SmallRig Wireless Handwheel Controller

Wirelessly control your follow focus motor from up to 328' away with this Wireless Handwheel Controller from SmallRig. The controller is part of the Wireless Follow Focus System ecosystem and connects to the separately available Wireless Receiver Motor for fine focus control. It features a built-in 1400mAh battery that allows the controller to be used for up to 20 hours.

Features of the handwheel controller include a power failure memory function to save recalibration, A-B point settings, a low-power OLED display, a replaceable marking disk, and a vibration warning function. Its wireless anti-interference algorithm allows a clean connection and provides ultra-low-latency control. The controller battery is charged via a separately available USB-C power cable.

Key Features

• Built-in 1400mAh battery lasts approximately 20 hours

• Power-failure memory

• Ultra-low-power OLED screen with user-friendly interaction

• High-precision BLDC control algorithm and anti-interference encryption algorithm

• Replaceable marking disk

• SmallRig Wireless Follow Focus Controller Kit

Mount your wireless focus control system onto your camera rig using this Wireless Follow Focus Controller Kit from SmallRig. The kit includes a focus controller module, wireless handgrip, handgrip adapter, and USB-C cable. The handgrip allows you to control start/stop on your camera using an optional cable, and it mounts onto your rig for either right- or left-hand configurations using the included handgrip adapter.

The handgrip is powered using a separately available LP-E6 battery, and it can also power the separately available focus receiver motor using a USB-C cable. Other features include a power-failure memory to prevent repeat calibration, optional wired operation, AB point settings, and a low-power 0.96" OLED display.

Key Features

• Supports follow focus/recording/power supply

• Low-latency and high-precision wireless/cabled control

• Power-failure memory; no need for repeated calibration

• Suitable for both right hand and left hands; easy to install

Compatibility

• Only compatible with SmallRig wireless follow focus systems

• Wireless Receiver Motor

• PD/QC fast charging protocol

• Cameras with REC function

• Supports different camera types via control cables

• SmallRig Wireless Receiver Motor

This Wireless Receiver Motor from SmallRig is a compact, wireless follow focus motor designed for use with the SmallRig Wireless Follow Focus System, including compatibility with the wireless handgrip and handwheel controller. The wireless motor features a clear 0.5" OLED display that provides calibration data and a standard 0.8 MOD cine gear to fit a wide variety of DSLR and cine lenses. When powered using a separately available PD power source, it features a strong torque up to 0.5 Nm. The motor can be powered using its USB-C input by utilizing a separately available L-series battery plate, or you can use a D-Tap or DC cable to power from an external V-mount or Gold mount battery or battery plate. A second USB-C port can also pass run/stop controls to a compatible camera. It also supports PD/QC fast charge power sources up to 9V/18W. The motor can be mounted onto your rig using its single, built-in 15mm rod clamp.

Compatibility

49/52/55/58/62/67/72/77/82/86/80/85/90/95/114mm DSLR camera lens and cine lens

• 15mm rod support system

• M0.8 lens and follow focus lens gear ring

• Incompatible with non-SmallRig wireless follow focus system

• PD/QC fast charging protocol

• SmallRig L-Series Battery Plate for Wireless Follow Focus Motor

Power your wireless follow focus motor using an L-series battery using this L-Series Battery Plate from SmallRig. This lightweight battery plate accepts a separately available, high-capacity Sony NP-F/L-series type battery, and it provides power to your SmallRig wireless follow focus motor. The plate mounts directly onto the contacts on the motor, so there is no need for an additional cable.