Lentequip SafeTap Connector

The Lentequip SafeTap Connector helps protect your battery from short-circuit conditions that can damage your battery or equipment and provides feedback on reverse polarity and over/under voltage. This SafeTap Connector is an active D-tap battery connector that features a built-in multi-colored LED indicator. A blue light indicated when the sleep mode is activated at 10V to guard your battery against deep discharge and to prevent your power source from draining into the damaging extreme low voltage zone should you leave a powered accessory unattended.

The assembly is quick and easy with "knock-out" sections on the left and right sides of the housing which allow for easy cable exit. Cable strain relief is accomplished via a tie wrap which counteracts pull-out forces.

Multi-Color LED

• Pulsating Green: All systems are good and the input voltage is between 11 and 18V
• Fast Flashing Orange: Input voltage exceeds 18V (power output disabled)
• Slow Flashing Orange: Input voltage is at or just below 11V, indicating a low battery
• Blue: Input voltage is at 10V or less (power output disabled)
• Red: 8A current limit exceeded (power output disabled)
• Fast Flashing Red: SafeTap is plugged in backwards (power output disabled)
• Purple: Too hot (power output disabled)
• Patent pending
• RoHS compliant
• Fast and easy assembly