$699.99
Financial Options Available
  • Affirm
  • Paypal Credit
Learn More
Requesting a Quote?
Looking for better pricing for an item? Create a new company account now to gain access to quoting, quick ordering, and more. Learn more details here.
See an issue on this page? Let us know.
SKU
105118-KIT
MPN
105118-KIT

Filmtools Benro S8PRO Tripod and MoveOver8 Slider with Case Kit

Questions about this product?
  • 17.6 lb Payload/7+0 Steps Counterbalance
  • 75mm Flat Base with 3/8"-16 Thread
  • Low-Angle 12.8" to 64" Height; 2 Stages
  • 3 Leg Positions; 75mm Half-Ball Adapter
  • Lightweight Portable Camera Slider
  • 23.6" of Camera Travel
  • Supports up to 17.6 lbs
  • 18mm Carbon Fiber Rails

The Benro A373F Aluminum Single-Tube Tripod with S8Pro Fluid Video Head features a 75mm bowl and includes a 75mm half-ball adapter. It's paired with the S8Pro Fluid Video Head, which has a 75mm flat base that attaches right to the half-ball adapter. The head supports up to 17.6 lb loads, and thanks to the flat base design with a 3/8"-16 thread underneath, the head can be moved from the tripod directly to sliders, jibs, and other support gear. The versatile system has a compact design with 2-stage/3-section single-tube legs and both rubber and spiked feet for use on virtually all surfaces. Each leg of the tripod is independently adjustable into three positions, allowing you to set up quickly and efficiently.

The S8Pro head offers 7+0 steps of counterbalance and continuous pan and tilt drag. There are also independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°. With the head attached, the tripod reaches a maximum height of 64". The minimum height is 12.8", which is a low height that isn't too common among most tripods. At this height, you can set up the tripod for low-angle shots.

Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it in either direction too much. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 3/8"-16 threaded hole on each side of the head to which you can secure articulating arms.


S8Pro Fluid Head

  • 17.6 lb payload
  • 75mm flat base with a 3/8"-16 thread
  • Can also be mounted directly on most sliders, jibs, and monopods
  • 7+0 steps of counterbalance
  • Continuous pan and tilt drag
  • Independent pan and tilt locks
  • +90/-75° tilt range
  • 360° pan range
  • Made of magnesium and aluminum
  • Rosette adapters on the left and right side for attaching the included pan bar
  • Sliding camera plate with safety lock
  • 1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
  • Two 3/8"-16 threaded holes for accessories

A373F Tripod

  • 75mm bowl tripod with a 75mm half-ball adapter
  • Maximum height of 64" with the S8Pro attached
  • Low-angle minimum height of 12.8"
  • Single-tube legs independently adjustable into three positions
  • Spiked and rubber feet
  • Flip leg locks
  • Aluminum construction
The Benro MoveOver8B 23.6" Carbon Fiber Slider & Case provides a lightweight solution for your cinematic camera movement needs. The slider creates a smooth and quiet form of movement for your camera that can move up to 23.6" laterally. The carbon support system can support up to 17.6 lbs and glides steadily along the two 15-layer 18mm carbon fiber rails.

Center mounting the slider is made easy by attaching a camera plate or tripod to the included cheese plate underneath the rail, which features 3/8"-16 & ¼"- 20 threads. Each end block is CNC machined aluminum and includes a 3/8"-16 thread and a ¼”-20 thread on the underside and two ¼”-20 threads on the top side. The included pivoting all-terrain legs have micro leveling capability and positive locking rosette connectors. Deluxe padded carrying case with shoulder strap included for easy transport and protection.

In the Box
  • Filmtools Benro S8PRO Tripod and MoveOver8 Slider Kit with Case
  • Benro MoveOver8B Carbon Fiber Slider
  • All-terrain legs
  • Deluxe padded carrying case
More From Benro Logo
More From Benro
View Page
More Information
SKU105118-KIT
BrandsBenro
MPN105118-KIT
SpecificationsMore Information
SKU 105118
Brands Benro
MPN A373FBS8PRO
More Information
SKU 67106
Brands Benro
MPN C08D6B
Specifications
Maximum Load 17.6 lbs
Head Height 3.15 in
Weight 3.13 lbs
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Customer Reviews
Copyright © 2023 Polyline Corp, a Magnasync/Moviola Company.